Do Motorcycle Tires Need to be Balanced?

Do Motorcycle Tires Need to be Balanced?

Your tires should be in good condition for your safety. And now the main question arises, do motorcycle tires need to be balanced? And what if your tires aren’t well balanced?

Do Motorcycle Tires Need to be Balanced?

Yes, you need to balance the motorcycle’s tires because of your safety. Unbalancing tires will lead to instability which may cause accidents.

So how can unbalanced tires harm you as well as your motorcycle? And what to do to balance your motorcycle tire? Worry not! We’ve covered all your questions in this post.

Do Motorcycle Tires Need to be Balanced?

As mentioned above, yes, you need to balance your motorcycle tires, and without good balancing, your tires could lead you to an accident.

Unbalancing tires could also harm your motorcycle by causing wear and tear to your motorcycle tires while riding. And obviously, you’ll face loss of performance if you don’t balance your tires.

Overall, it would be best to balance tires in your motorcycles for your safety and motorcycle health. 

How to Know Your Motorcycle Tires aren’t Balanced?

Tires in your motorcycle are the vital component that connects you and your motorcycle to the surface. And for better stability and grip on the road, you need balanced tires. 

However, there are some signs that you may experience if your tires aren’t well balanced. If you observe unnecessary vibrations while riding on the smooth surface, then your tires are likely unbalancing.

So what to do now?

Here are a few things that you should do to balanced the motorcycle tire

  • Check and try to remember if you ride a motorcycle on an uneven surface which might harmed your tires.
  • Scrutinize your tires and see any leakage. 
  • Get your motorbike to a repair center if you find any wear and tear.

Do You Need to Balance Motorcycle Tires?

Yes, you need to balance motorcycle tires for your safety. The unbalanced tires will produce unnecessary vibrations while riding. And when inspecting closely, you’ll see the wear and tear of motorcycle tires this wear and tear of motorcycle tires will cause low fuel economy.

What Causes Motorcycle Tires to Not Balance?

Manufacturers made tires to distribute the motorcycle weight uniformly. When riding, the weight of the motorcycle keeps distributing uniformly on tires. And if you use the same set of tires for years, then the motorcycle weight causes unbalancing tires.

Tires are also unbalanced when it experiences wear and tear due to riding on hard surfaces. Even in many cases, the motorcycle tires also experience unbalancing because of the sharp turn that many riders love to do. 

If you rode your motorcycle on rough surfaces and did some incredible sharp turns in the past, then we’d recommend inspecting your motorcycle tires closely. Even a regular close inspection of motorcycle tires is enough to tell whether your motorcycle needs a good pair of tires or not.

How to Protect Your Tires From Unbalanced?

What if you find your motorcycle tires to be unbalanced after a close inspection? And how to protect your motorcycle tires.

No worries! Here’re some tips which you need to remember if you find your motorcycle tires unbalanced.

Tips to Protect Your Motorcycle Tires from Being Unbalanced:
Always use the tire above the recommended PSI value. 
Always check the tire pressure.
Don’t reduce PSI value for softer rides.

Always Use the Tires Above the Recommended PSI Value: 

Generally, running the tires below the recommended PSI value is the main reason behind tires being unbalanced. 

And since average tires lose approx 1 PSI every month and that’s why we recommend using tires above the recommended PSI value. Please note that weather conditions also impact the loss of PSI value.

Always Check Tire Pressure: 

If you’re going to drive on your favorite motorcycle, we would recommend checking the tire pressure. 

You can check the recommended tire pressure on the motorbike manual, and don’t forget to check the actual tire pressure with suitable tools. 

Tips to Protect Your Motorcycle Tires from Being Unbalanced.
© streetbiker-mag.com – free to share with attribution and backlink. Thank you!

Don’t Reduce Tires PSI Value: 

Some riders think that lowering the PSI value of tires causes soft riding. And if you think the same, you’re a fool because you’re playing with your life just because of smooth riding. Riding in the low PSI value causes your motorcycle tires to be unbalanced, and this might cause a severe accident.

How Can You Check the Tire Pressure?

Steps to Check the Tires pressure:
Check the cold tire pressure.
Note down the PSI value. 
Use the Gauge to measure the PSI value. 
Refill your tires. 
Check the tire pressure monthly. 

So far, you have learned the importance of good tire pressure. Good tire pressure not only protects you from accidents but also boosts the fuel economy of your motorcycles. 

Step 1: Check the Tires Pressure. 

The first step to measure the PSI value of your tires is to measure the pressure of cold tires.

Now before measuring the pressure, you’ve to understand what cold tires are. Technicians consider any unused tires for more than 3 hours

Measuring cold tire pressure will help you to identify the standard tire pressure before riding the motorcycle.

Step 2: Note down the PSI value and Compare to Recommend PSI Value. 

After measuring the PSI value, you need to write down the reading in your notebook carefully. We recommend comparing the calculated PSI value with the recommended PSI value of your motorcycle tires. 

You can see the recommended PSI value of your motorcycle tires in the motorbike manual, or you can ask your motorcycle dealer. 

Step 3: Using Gauge to Measure Tire Pressure. 

For checking the tire pressure, you need a Gauge to measure the tire pressure.

You need to place your Gauge in your motorcycle tires valve stem and have to press hard. Now, your Gauge will reflect reading, and you need to write down the reading carefully.

Apply the same procedure for your second tire too. 

Step 4: Refill Your Tires. 

Refill your tires if you found less PSI value than the recommended PSI value.

After refilling, use the Gauge again and measure the PSI value again. Please pay attention that you shouldn’t underinflate and overinflate the tires. 

Step 5: Check the Tires Pressure Monthly. 

Last but not least, checking tire pressure every month is the most critical step that you should be aware of.

Checking tire pressure monthly not only protects your tires from wear and tear and will save your fuel economy too. 

How Can You Check the Tire Pressure?
© streetbiker-mag.com – free to share with attribution and backlink. Thank you!

How Do Tires Get Balanced Again?

Generally, technicians or tire manufacturers use a tire balancing machine to identify the heavier or lighter side of tires to balance them.

The technician would spin the tires and note readings based on vibrations and by doing this technician would know how much weight should be put.

What Are Some Types of Tires Balancing?

Generally, there are three types of tire balancing that you need to know.

Dynamic:

 In dynamic tire balancing, the technician uses the machine to spin the tires at a certain speed. The machine AI would calculate and read how much and where the weight should add to balance the tires. 

Static:

Static tire balancing is the simplest type of tire balancing and the mechanic used this method only in the lightest tire balancing cases. In this type, the technician places the tire in the vertical supporter with the spindle tool. 

In the static balancing, the technician will add weight uniformly, only one line. 

Road Force:

Road force is the most advanced and efficient technology that technicians use. In road force, the machine produces the virtual road conditions and puts the weight on tires uniformly to motorcycle weight. 

Then the computer AI will translate the readings and show what’s wrong with tires and how much and where the weight should add to balance the tires. 

What Are Some Types of Tires Balancing?
© streetbiker-mag.com – free to share with attribution and backlink. Thank you!

Frequently Asked Questions:

Do motorcycle tires need to be balanced?

Yes, the motorcycle tires need to be balanced because of the rider’s safety. Unbalancing tires will lead to instability which may cause accidents.

What are the few things that you should do if you suspect your tires aren’t balanced? 

1. Check and try to remember if you ride a motorcycle on an uneven surface which may harm your tires.
2. Scrutinize your tires and see any leakage. 
3. Get your motorbike to a repair center if you find any wear and tear.

What causes motorcycle tires to not balance?

Manufacturers made tires to distribute the motorcycle weight uniformly.  When riding, the motorcycle weight keeps distributing uniformly on the tires. And if you use the same set of tires for years, then the motorcycle weight causes the tire to unbalance the tires. 
In many cases, the motorcycle tires also experience unbalancing because of the sharp turn that many riders love to do. 

How to protect your motorcycle tires from being unbalanced?

Tips to Protect Your Motorcycle Tires from Being Unbalanced:
1. Always use the tire above the recommended PSI value. 
2. Always check the tire pressure.
3. Don’t reduce PSI value for softer rides.

How can you check the tire pressure?

Here’re Few Steps to Check the Tires pressure:
1. Check the cold tire pressure.
2. Note down the PSI value. 
3. Use the Gauge to measure the PSI value. 
4. Refill your tires. 
5. Check the tire pressure monthly. 

Our Verdict:

Do motorcycle tires need to be balanced? Yes, you need to balance your motorcycle tires, and without good balancing, your tires could lead you to an accident.

Overall, you need to balanced your motorcycle tires for your safety and motorcycle health. 

Leave a Comment

Your email address will not be published. Required fields are marked *